You should remember that more than ten years ago, solar street lamps were not used in large areas, and they were still traditional lighting lamps. However, the disadvantages of traditional street lamps were obvious to all, such as high maintenance costs and short service life. Since the solar street lamp has been widely introduced into our daily life, there will always be some people who feel that the solar street lamp does not have the traditional road lamp
What is the cause of this? Is it possible to make solar street lights brighter through some technical treatment? This small series for this problem to do a unified solution.
1, the planning of colloidal electrolyte, the effective inhibition of the active substance of rust and plate sulfate phenomenon, can delay the performance decline of the battery in the process of use, greatly improve the battery's deep charge and discharge cycle life.
2, solar street lamps if be installed in the road, we also need to consider whether it will be blocked by road both sides plant, because of the green plant shade will limit electricity transformation, which will affect the brightness of the solar street light, in this case we have to adjust the height of the solar street light light pole according to the circumstance, can appear as much as possible to make solar panels.
3, often check the various components of the solar street lamp to see if it is damaged. If there is damage, it should be repaired in time, so as to ensure the brightness of the solar street lamp and the service life of the solar street lamp. Clean solar panels regularly to improve the conversion between solar energy and electricity.
4, confirm the purchase of the brightness of the street lamp, choose the strength of the strong, good reputation of the solar street lamp manufacturers, so that the product quality and after-sales service of the solar street lamp will be guaranteed.
