At the beginning for any resources are more valuable, at the beginning of solar led street light in the process of using, also according to the actual situation of intelligent dispensing for energy saving, individual on the way, after the middle of the night when the number of pedestrians less, solar street light power will be transferred into half power or a third power, so what is the full power, what is the half power, What is 1/3 power, in the end what is the difference today we will give you to explain the difference between full power and intelligent control power.
Solar street lamp LED lamp head wire lithium control battery white cap separated, wiring attention to use electrical tape wrap.
Separately, at the coming of the night, the person is more, so that customers take on full power in the middle of the night, the night when take half power, individual, lighting, 8 hours may be divided into 4 hours at full power, power of four and a half hours, half power to match all over 2 hours power for 1 hour, the wastage of the actual time is 6 hours. The wiring on the back of the solar panel is reverse buckle design, which can be gently pried open with a screwdriver. The wiring of the solar panel (red cap is connected to the positive pole line, black cap is connected to the negative pole line) corresponding to the positive and negative pole line separated from the black cap of the lithium integrated battery, and the wiring should be wrapped with electrical tape.
LED street lamp it is a kind of efficient solid state light source based on semiconductor PN junction formed with weak electric energy can emit light, in a certain forward bias voltage and injection current, injected into the hole in the P region and injected into the N region of electrons in the diffusion to the active region after radiation compound and emit photons, the electric energy directly into light energy. It is a solid cold light source, with environmental protection, no pollution, less power consumption, high light efficiency, long life and other characteristics, therefore, LED street lighting will become the best choice for energy-saving transformation.
This would make it possible to be absolutely small in the configuration of panels and batteries, so that the price of the whole solar street lamp would definitely fall.
The power of the LED light source is proportional to the size of the solar panel and the battery. The greater the power of the LED light source, the larger the capacity of the panel and the battery, the higher the price of the whole set. Different uses, in the choice of power is also different, according to the actual situation.
