Solar street lights in the installation of the need to first pour the street light foundation, how to pour a good solar street light foundation, what needs to pay attention to?
Solar street light foundation pre-built parts need to be placed in the middle of the foundation pouring pit, it should be noted that the pre-built parts, the foundation and the ground should be on the same level, but also to ensure that the top of the screw and the ground is on the same level, it is best to have a side and the road is parallel, so as to facilitate the subsequent operation, which has the added benefit of the pole is installed after the pole is vertical and not skewed, the next section of the PVC pipe is placed in the placement of the battery box
The other end needs to be from the low level of the pouring pit fixed plate is in the middle of a distance up through, generally 30CM, next with the concrete pouring, pouring can also use the vibration pump vibration, so that the concrete can be more uniform after solidification, solid, followed by the use of grinding machine to polish the cement surface, so that we get a perfect pouring base.
During construction, we should pay attention to the fact that before pouring, it is best to use some soft material to close the ends of the PVC pipe, such as not using or plastic to seal the ends of the PVC pipe, which can prevent the concrete from entering the PVC pavilion and causing blockage of the PVC pipe, before pouring we should check whether the height of the pit is accurate and there should be no debris in the pit.
If there are debris need to be cleaned up in time, found in the pit of other pipelines to be reported in time, reasonable treatment, when pouring concrete, pay attention to the consistency of the concrete, not too thin or too thick, concrete in the production of concrete also has to be based on the progress of the construction staff to decide how much concrete material to mix, to avoid the concrete waiting too long to affect the quality of the foundation pouring.
