How to maintain the solar street lamp, so that we can better use the solar street lamp, prolong the service life!
1, the maintenance of solar battery
The battery of the solar street lamp must prevent rain from entering, and its panel lighting surface should be regularly cleaned and maintained to prevent dust invasion. It is also worth noting that the temperature of the solar battery should be controlled, not too high, not too low, but also to avoid complete discharge. If you want solar street light to have a longer life, the battery must not be ignored.
2, the inspection of solar power lines
The focus of maintenance is on the lines connecting the components.
3. Keep the solar panels clean
As we all know, the battery charge depends on the panel charge, but if the panel is covered with a thick layer of dust, it can not ensure the efficiency of the panel charge, but also may give the battery charge. Long-term feed can shorten the life of the battery, so it is important to clean the surface of the solar panel regularly.
4. Maintenance of solar street lamps
Solar street lamps and lanterns are almost the same as traditional street lamps. We should not press the street lamp switch so frequently and do not let the street lamp often be used in the humid environment. Generally speaking, solar street lamps should be able to use for a long time.
To sum up, when the solar street lamp is maintained, if it is on the rural road surface, it will be cleaned every six months or so, and if it is on the urban road surface, it will be cleaned every three months.
Also note:
1, the usual cleaning with a clean feather duster gently brush the dust can be very careful.
2, if it is a non-metallic sunlamp can be wiped clean with a wet cloth, pay attention not to wipe the power line.
3, if the metal lighting can be wiped with a dry cloth, do not touch water.
Pay attention to the beauty of the solar street lamp post after installation. From the beginning of foundation construction, the lamp position shall control the straightness according to the main line, and rationally change the line shape according to the road design. The lamp post shall be straight, and the welding seam and the access port shall avoid the main line direction, and keep the whole line consistent.
