The method of cleaning solar water heater scale is to release the water in the tank, hold the vacuum tube with both hands and rotate it back and forth to loosen it, then push it to the tank so that the bottom can come out from the base, and then drag it down so that you can take out the vacuum tube, pour out the water in the vacuum tube, and then repeatedly shabu clean with clean water
This will be all the vacuum tube clean in turn, add tap water to the tank, so that the scale in the tank out, and then install the vacuum tube one by one can be installed, the installation should check whether the seal at the installation hole of the tank is intact, if there is a broken condition, should be replaced with a new seal.
In addition, in the process of use, you should add water to the tank, try to make the water temperature in the tank down, preferably not more than 75 degrees, so as to reduce the generation of scale.
