Solar street light is important refers to the use of crystal silicon solar panels to supply electricity and stored in the battery, and then with high efficiency ultra-bright LED light source, controlled by the company's independent research and development of intelligent charge and discharge controller used to replace the traditional street lights for power supply lighting of a new street light.
Solar street lamp LED lamp head wire lithium control battery white cap separated, wiring attention to use electrical tape wrap. It has the characteristics of energy saving, environmental protection, economic and practical, firm, long service life, high insurance function, good luminous effect, convenient and quick installation, and can be widely used in the main and secondary roads of the city, residential areas, scenic spots, parking lots and factories and other occasions.
Solar street light adopts DC power supply, photoelectric control, no need to lay cables, no need to pay electricity, and has the characteristics of high strength, good light transmission. LED street lamp it is a kind of efficient solid state light source based on semiconductor PN junction formed with weak electric energy can emit light, in a certain forward bias voltage and injection current, injected into the hole in the P region and injected into the N region of electrons in the diffusion to the active region after radiation compound and emit photons, the electric energy directly into light energy. It is a solid cold light source, with environmental protection, no pollution, less power consumption, high light efficiency, long life and other characteristics, therefore, LED street lighting will become the best choice for energy-saving transformation. In addition, however, it also has the following characteristics:
1, the existence of long service life characteristics
The LED light source of our company adopts imported chip 1W package, which can ensure that the heat sent by THE LED is rapidly transmitted to the radiator. In addition, its radiator can be integrated with the lamp housing design, fully guarantee the life of LED light source.
2, there are intelligent control, constant current drive and power according to the need to achieve intelligent adjustment characteristics
The solar street lamp produced by our company has thin and thin appearance, good heat dissipation consequences, can effectively reduce wind resistance and reduce the load of the lamp pole, strengthen its insurance factor. The wiring on the back of the solar panel is reverse buckle design, which can be gently pried open with a screwdriver. The wiring of the solar panel (red cap is connected to the positive pole line, black cap is connected to the negative pole line) corresponding to the positive and negative pole line separated from the black cap of the lithium integrated battery, and the wiring should be wrapped with electrical tape. In addition, its intelligent control can realize the high-power LED light source of light control, time control and active power adjustment, intelligent power adjustment, ensure 365 daylights every day.
3, there is low voltage, low temperature, start speed without delay characteristics
Solar street lamps do not start delayed like individual street lamps, use dc voltage, and are very safe and robust. In addition, its LED light source belongs to the cold light source, the working temperature is below 60℃, will not cause the lamp shade aging yellow scene.
4, LED light source modular integrated design, can be arbitrarily combined into different power, different brightness products
Every LED module produced by our company is a unique light source and can be exchanged, and local failure will not affect the deformity of all street lights, disassembly and maintenance is very convenient, but also can save money.
