Solar street light installation method：
Solar street lights have the advantages of good stability, long life, high luminous efficiency, easy installation and maintenance, high safety performance, energy saving and environmental protection, economic and practical, etc. They are widely used in the field of public power lighting, so how to install solar street lights?
1、Pouring the foundation
(1) establish the installation location, according to the construction drawings and survey of the site geology, in the top of the street light without shade, with a street light spacing of 40 meters as a benchmark, to determine the installation location of street lights.
(2) excavate the street light pit, excavate the street light pit at the installation location, dig the pit with care to confirm and protect other facilities such as cables and pipes at the excavated location.
(3) Bury the battery, build a battery box in the dug pit and bury the battery box into it.
(4) pouring street light foundation pre-buried parts, place the solar street light pre-buried parts into the pit, and put one end of the steel wire tube into the middle of the pre-buried parts, and the other end into the buried battery. And keep the pre-buried parts, the foundation and the ground on the same level, with C20 concrete to pre-buried parts to pour fixed.
(5) After the construction is completed, timely clean up the residue on the positioning plate, and after the concrete has solidified, start installing the solar street light.
This picture is provided by the registered user "Strong ambition", copyright statement feedback
2、Solar street light component installation method
(1) Install the solar panel: put the solar panel on the panel bracket, tighten it with screws, connect the output line of the solar panel, pay attention to the positive and negative poles of the correct panel, and tie the output line of the panel with a tie, tin the panel junction after connecting the line, and then put it aside to wait for threading.
(2) Installation of LED lamps and lanterns: put the light wire out of the light arm and leave a section of the light wire at one end of the installation head; support the light pole, put the other end of the light wire out of the pre-determined down-line hole of the pole and put the light wire down to the top end of the pole; install the light head at the other end of the light wire, align the light arm with the screw hole on the pole, and then tighten the light arm with screws using a quick wrench; put the light wire through the top end of the pole Make a good mark, put the two wires together with the solar panel wire with a thin threading tube to the bottom end of the pole, and fix the solar panel on the pole.
(3) Lifting the light pole: After checking the fixed condition of each part, put the rope on the light pole at the right position, slowly lift the lamp, when the light pole is lifted to the top of the foundation, slowly put down the light pole, while rotating the light pole, adjust the light head to the road, and align the hole on the flange with the foot bolt; after the flange falls on the foundation, put on the flat pad, spring pad and nut in turn, tighten the nut evenly with a wrench, and fix the light pole.
(4) Install the battery and controller: put the battery into the battery well, use a thin wire to thread the battery line to the top of the roadbed; then connect the connection line to the controller, first to the battery, then to the load, and then to the solar panel; debug whether the street light is working properly, if normal, set the mode of the controller, let the street light on, no problem can be sealed with the light cover of the pole.
3、Component adjustment and secondary pre-burial
After the solar street light installation is completed, check the overall street light installation effect, re-adjustment for the tilt of the stand pole, and check whether the sunrise angle of the battery panel is deviated, whether the lamp head is justified, etc.; confirm that all adjusted, the second pre-buried pole base, with cement will be built into a small square pole base, so that the solar street light is more solid and reliable.
Second, the installation of solar lighting street lights to pay attention to what
Solar lighting street lights can save energy, relieve energy consumption, is a very practical new street lights, but the installation of solar street lights should also pay attention to some aspects of the matter, such as.
1, installation location
Try to avoid installation in low-lying sections of the road, pouring time to pay attention to whether the installation site is backfilled, if it is backfilled, the foundation pit to deepen and increase, so as to ensure the stability of the solar street lamp later use.
2、Installation time
Solar street light installation should be installed on a sunny day, if installed on a rainy day, after the light only power consumption without charging, will not meet the design requirements; and to note that the day after installation try not to light up, and so the next day after a day charge, and then connect the load in the evening.
3、The angle of the panel
Solar panel brackets are generally made before the factory tilt angle is made, when installed, just make sure to face south, and to ensure that there is no shade around the line, deviation may need to be adjusted.
4、Wiring to pay attention to
Solar street lights are low-voltage systems, wiring is mainly to distinguish between positive and negative poles, to determine the positive and negative poles of the panels, light sources, batteries, to strictly follow the instructions on the controller wiring operation.
