1, assembly and use should prevent static electricity
Do not use your hands to touch the conductive part of the protection board; such as direct contact must be made, the body should be well grounded or release the body's static electricity; soldering iron and assembly of the use of power tools must be well grounded, no leakage.
2, assembly and use should be avoided to protect the board under stress, so as not to damage the electronic components lead to board failure.
3, welding
Soldering iron head temperature less than 280 degrees; solder the same device for no more than 10S; do not use acid flux.
4、Storage
If long-term storage with a battery pack, due to the static current of the protection board and battery self-discharge, the need for regular charging of the battery pack; storage, pay attention to waterproof and moisture-proof.
5、Transportation
During transportation, attention should be paid to waterproof, moisture-proof, avoid extrusion, collision, etc. to avoid damage to the protection board.
6、Maintenance
The protection board should be tested and maintained by professionals in case of failure.
