Following the development of lithium iron phosphate technology, miniaturization of the increasing number of devices, the function of lithium batteries put forward high requirements, lithium batteries do not have to be used for a long time will have an impact on the life. So, usually, how should we dispose of and maintain the lithium battery when it is idle?
Lithium batteries do not need to maintain for a long time how? Lithium iron phosphate batteries do not exist memory effect, can be used with the charge, but pay attention to the lithium battery can not be over-discharged, excessive discharge will form irreversible capacity loss. When the machine reminds the low power should immediately start charging. Daily use, just charge the lithium battery to be placed in half a clock, charged function stable before use, otherwise it will affect the battery function. Do not use the instrument, be sure to remove the battery stored in a dry and cool place.
Pay attention to the lithium battery operating environment: lithium battery charging temperature of 0 ℃ ~ 45 ℃, lithium battery discharge temperature of -20 ℃ ~ 60 ℃. Do not mix lithium iron phosphate batteries with metal objects, to avoid metal objects touching the positive and negative battery, forming a short circuit, endangering the battery and even form a danger. Do not knock, needling, stepping, modification, sunlight lithium batteries, do not place the battery in the microwave, high voltage and other environments.
AL<a target=_blank href='dghoppt.com'>Lithium battery</a> is not used for a long time, how to maintain and how to activate it
Use the regular matching lithium battery charger to charge the battery, do not use poor quality or other types of battery chargers to charge lithium batteries. Lithium iron phosphate batteries should be charged with 50% to 80% of the power for a long time, and removed from the instrument and stored in a dry and cool environment, and every 3 months to charge the battery, to avoid storage for too long, the battery is too low due to self-discharge, resulting in irreversible capacity loss.
The self-discharge of lithium battery is affected by the ambient temperature and humidity, high temperature and humidity will accelerate the self-discharge of the battery, it is recommended to store the battery in a dry environment of 0℃～20℃. When not used for a long time, the lithium battery should be removed and placed in a cool and dry place. Do not freeze to avoid moisture corrosion. Avoid putting it in a high temperature car to use. If kept for a long time, the battery will be charged to 40% and then placed.
What happens when lithium iron phosphate batteries are not used for a long time? Lithium batteries are not used for a long time, should be scientifically and reasonably preserved to prevent damage to the lithium battery easily lead to shorten its service life. Lithium battery self-discharge rate of one month is generally 5-10%, generally speaking, one or two months without a problem, but it is best to charge, because the battery capacity will drop a lot if you do not have to recharge for a long time. Lithium battery because of a long time in a low or no battery condition will make the battery internal resistance to the movement of electrons, resulting in a smaller battery capacity, may not be charged.
How to activate the lithium battery that is not used for a long time? Just use the lithium battery generally have the remaining power, this time do not charge. Put the battery into the product normal use, until the power is low to completely unable to turn on. The first charge, it is best to use the original lithium battery charger charging, and off charge is better, many people do not turn off the charge for convenience, which is not conducive to activating the lithium capacity. Continuous charging for more than 12 hours and less than 15 hours. If the prompt has been full, do not unplug, so that it has been kept in a charging condition.
After the initial full charge, if the normal use to the inability to turn on the computer. Can continue to operate according to step 2 again. Completely discharge, completely charge (i.e. repeat process two and process three) repeat three times. This time the lithium battery is activated successfully and can reach the best capacity condition.
If you have any demands in batteries, please feel free to contact info@manlybattery.com
