Village solar street lights have been used in large and small villages and towns one after another, with energy saving and environmental protection, no pollution and other advantageous features. Effective use of natural resources, reduce the loss of energy, and thus save economic expenditure. So what maintenance work needs to be done during the use of solar street lights in the countryside?
Countryside solar street lights are collected through the battery plate solar energy, so before installation and use need to observe the surrounding tree branches houses have no shade, once the battery plate shade, the later can not be used, but also need to be reinstalled. Before use, check whether there are cracks or stains on the panels, and the connection of the lines should be carefully checked. Regularly carry out maintenance, and consult with professionals when problems arise to solve them as soon as possible.
The battery stores power during the day and shines to illuminate at night. It is generally installed at the base position of the countryside solar street light, and the light pole should be lifted up when maintenance is carried out and reinstalled on after inspection. Tong Cang dome case, if not artificially caused by the damage, can be used for about 3 years, in the use of the process found that the wiring corrosion or poor contact to timely repair, to avoid affecting the use of the safety hazards.
In order to ensure the normal operation of rural solar street lights, the general maintenance cycle is a week, after encountering a relatively strong wind and rain, you need to check the state of the panels, controllers and batteries to avoid water and waterlogging phenomenon. After a certain period of use, the overall overhaul and cleaning should be carried out, and the lamps and other parts will be maintained. Found that the lamps and lanterns flicker or short-circuit situation to be replaced in a timely manner to prevent the impact of use.
