I. Description of storage and installation surrounding environment
1. Storage instructions：
Ensure that all components are well packaged during storage
Store in a ventilated and dry environment
Storage temperature: -20°C to 60°C
Storage humidity: less than 90%, free from freezing
Keep away from corrosive gases and liquids
The battery should not be inverted or tilted
Important: When stored for a long time, the battery must be charged every two months. The solar panel can be connected to the controller and left in the sun for 1-2 sunny days.
2. Operating environment
Operating temperature: -15°C to 50°C
Operating humidity: 0 - 90%
3. Safety instructions：
1. Save this installation manual - this manual contains important information to be followed during installation and maintenance, please make sure to save this manual
2. Installation and maintenance must be performed by a qualified technician
3. Warning - No fire or smoke in the installation area! Lead-acid batteries can produce small amounts of hydrogen gas that can explode in the presence of open flame.
4.Prevent short-circuiting of the battery and solar panel, which could cause damage to the components or even burn the personnel
5. When the controller is connected, all its positive and negative terminals must not be short-circuited, otherwise it will cause damage to the components.
6. During transportation and installation, please take care to protect fragile items such as solar panels and lamps
7. During transportation and installation, please take care to protect the paint surface of the light pole, straight arm, bracket and light fixture, etc.
8. The copper cores of cables, corners of panel frames, light poles, straight arms, and brackets are sharp, so please wear gloves to prevent skin scratches
9. It is not recommended to install lights on rainy days
