No matter the lighting system of solar street lamp or the system of solar garden lamp and landscape lamp, they all provide the same function and the same function. Solar street lamp LED lamp head wire lithium control battery white cap separated, wiring attention to use electrical tape wrap.
The wiring on the back of the solar panel is reverse buckle design, which can be gently pried open with a screwdriver. The wiring of the solar panel (red cap is connected to the positive pole line, black cap is connected to the negative pole line) corresponding to the positive and negative pole line separated from the black cap of the lithium integrated battery, and the wiring should be wrapped with electrical tape. The difference is only in design, but the systems work the same way. Here's a basic overview of how sunlight works.
Any solar system has four important components: solar panels, batteries, dedicated solar controllers and lamps. Solar street lamp LED lamp head wire lithium control battery white cap separated, wiring attention to use electrical tape wrap. During the day, the solar panel receives sunlight to generate electricity, which is charged by photons generated by the solar panel collecting and stimulating electrons in the silicon cell.
These electrons are knocked down and collected through the wiring in the solar panel and fed into the battery for storage. This is produced from sunrise until sunset (that is, during the day, when there is light, the panels generate electricity and the batteries have power).
Special solar controller by detecting the solar panel power and voltage reduction to determine when it is dark. If it's night, this triggers the system to shut down power the battery and turn on the light fixture. The battery then powers the LED light source, which turns on. The controller has the function of light control and overtime control. When setting the number of hours after night, the LED closed lamp will be closed actively.
The cycle continues day after day. When we need to adjust the time, our manufacturer has a special remote control may be delivered to the customer Settings. The only difference between solar systems is the working profile and system components used to produce light. For example: the little light you find for your garden at a home improvement store usually powers it for the night. They charge small batteries during the day and operate lamps only when the batteries are charged at night.
To sum up, the solar system is formed by four parts, how many between large components are complementary to each other, any parts damaged, can lead to system can't work deformity, it is need to our factory in the production of solar street lamps shall be careless when, conscientious completes each production link, down-to-earth do a good job in every parts, For the cause of solar lighting energy saving real dedication of their own strength!
