Nowadays, solar street lights are very intelligent and generally use the controller to control the charging and discharging. Many customers do not know how to adjust the time of solar street lights. Here I will give you a detailed explanation of this knowledge.
Solar street light time how to adjust?
1. Light control means that the solar street light is only controlled by light, after installation, there is no need to adjust the time of light and light off according to the seasonal changes, the light is automatically off, the darkness is automatically on.
Time-control is a common control method for solar street lights, first set the controller to light up the length of time, and so on the dark automatically light up, light up time to reach the specified time automatically extinguished, this control method is relatively reasonable for the user. This control method is relatively reasonable for users. It can control the cost price of solar street lights, and also extend the life of solar street lights.
Solar street light how to adjust the time also depends on what type of controller is used.
1, charging circuit using a double MOS series control loop, so that the circuit voltage loss than the use of diodes to reduce the charge by nearly half the use of PWM energy-saving control, so that the power consumption is greatly increased.
2, the load mode using pure light control, light-sensing system senses the light is dark will automatically light up, light-up time using microprocessors and special control algorithms to achieve intelligent control.
3, scientific battery management, when there is over-discharge, the battery voltage to promote charging, repair and compensation after normal use, the use of direct charging and float charging connection rechargeable batteries, while having high precision temperature compensation, so that the charge more accurate control.
4, all industrial grade chips and enclosed components of all constraints in the cold, high temperature, humidity and other environments to operate properly. Also use crystal time control to make the time control more accurate.
How to adjust the time of solar street light timing switch?
1, we can adjust the time through the remote control, for example, there is a cancel and resume on it, just press and hold this key, after that the letters displayed in the lower left corner will be hidden, and then adjust the clock button, different function keys will appear. For example, you can adjust the day of the week or adjust the time, including adjusting the minutes, etc., and then we will enter the local time.
2, the next click on the timer keyboard, the LCD display will see an open above the word, which indicates the first open time, and then enter the correct day and time, minutes on the start, and then finally press the timer function key.
3, after the timing is set, the current time will be displayed on the top of the display, after which it can be transformed into a timing mode, to achieve automatic control. For example, when it reaches 6:00 pm, the street light can be automatically lit, and at 7:00 am, it can be automatically turned off.
