Solar street lamps need no special person to control them in the process of utilization. They can actively turn on the light at night and actively turn off the light at dawn, and at the same time, they can also regulate the time of turning on the light at night. So how does all this work
Solar LED street light sunlight for energy, solar panels to the battery during the day, night battery power use, without expensive pipe laying, confused can be arbitrary adjust the layout of the lamps and lanterns, may adjust the street lamp switch time, insurance and energy saving, no contamination, no need manual operation, strong solid work, thrift electricity maintenance free.
The wiring on the back of the solar panel is a reverse buckle design, which can be gently pried open with a screwdriver. The wiring of the solar panel (red cap is connected to the positive pole line, black cap is connected to the negative pole line) corresponding to the positive and negative pole line separated from the black cap of the lithium integrated battery, and the wiring should be wrapped with electrical tape.
Solar street light is powered by crystalline silicon solar photovoltaic panels, maintenance-free lithium battery storage energy, super bright LED lamps as a light source, controlled by the intelligent charge and discharge controller, used to replace the traditional street lighting, solar street light ten advantages:
First, no need to lay cables;
Two, no need to exchange power supply; No electricity generated;
Three, dc power supply, photosensitive control, good firmness;
Four, long life;
Five, high luminous efficiency,
Six, the device is easy to maintain, high insurance function, seven, energy-saving and environmental protection;
Viii. Economic and practical;
Nine, no manual operation;
Ten can adjust the layout of lamps and lanterns and other advantages. LED street lamp it is a kind of efficient solid-state light source based on semiconductor PN junction formed with weak electric energy that can emit light, in a certain forward bias voltage and injection current, injected into the hole in the P region and injected into the N region of electrons in the diffusion to the active region after radiation compound and emit photons, the electric energy directly into light energy.
It is a solid cold light source, with environmental protection, no pollution, less power consumption, high light efficiency, long life, and other characteristics, therefore, LED street lighting will become the best choice for energy-saving transformation.
.
