The important thing about solar street light installation is the foundation, just like building a house, no matter what you do, the foundation is always important. The foundation is used to fix the structure of solar lamps and lanterns, and it also plays the role of placing and protecting the battery. Due to the different heights of solar street lights and the size of the wind, various solar street lights have different strengths for the foundation. During construction, ensure that the foundation strength and structure meet the design requirements. So how to install the solar street light cage? The specific steps are as follows.
Solar street light cage installation steps.
1, in strict accordance with the size of the solar street light foundation map (by the construction personnel to determine the construction size) along the road to excavate the pit;
2, the foundation, the upper surface of the buried cage must ensure that the level (using a level meter for measurement, testing), the cage in the foot bolt must be perpendicular to the upper surface of the foundation (using an angle ruler for measurement, testing);
3、After the excavation of the pit is completed, place it for 1~2 days to see if there is groundwater seepage. If there is groundwater seepage, immediately stop construction;
4, the construction of solar street lights before the preparation of the tools needed to make the foundation and the choice of construction experience of the construction staff;
5, in strict accordance with the solar street light foundation map selection of suitable cement, soil acidity must be used in places with high acidity and alkalinity of the special cement; fine sand and gravel shall not have impurities such as soil that affect the strength of concrete;
6、The soil around the foundation must be compacted;
7、The bottom of the slot where the battery compartment is placed in the foundation must be added with drainage holes or according to the drawing requirements;
8, before construction, the ends of the threading pipe must be blocked to avoid foreign objects entering or blocking the construction process or after construction, resulting in difficulties or inability to thread the installation;
9, solar street light foundation after the production needs to be maintained for 5 to 7 days (according to the weather conditions to determine);
10, solar street light foundation acceptance before the installation of solar street lights.
The above on solar street light cage to install how to share here, the construction staff can be based on the construction site, the responsibility of the solar street light installation site selection of unreasonable to raise doubts and stop construction, and the situation will be reported to the relevant person in charge within the first time. Must be completed by the deadline for rectification, in accordance with the actual construction standards.
