In the infrastructure construction of the new city, solar street lamps have also begun to be installed on both sides of the city path, and solar street lamps have become the main force of the new city path lighting. The wiring on the back of the solar panel is a reverse buckle design, which can be gently pried open with a screwdriver. The wiring of the solar panel (red cap is connected to the positive pole line, black cap is connected to the negative pole line) corresponding to the positive and negative pole line separated from the black cap of the lithium integrated battery, and the wiring should be wrapped with electrical tape. In order to ensure the smooth performance of the city street lamp lighting device, we should pay attention to the following number of requests when we install the construction.
First, ensure the fairness of the configuration. According to the local actual situation, the manufacturer should do a fair job in the early stage of the installation, and ensure the good use of solar street lamps in the city path lighting while ensuring the cost of solar street lamps. The installation of solar street lamps in new cities can improve the infrastructure of urban roads only by saving energy and reducing costs.
Two, the quality of light source requirements. The service life of an individual light source is 3-4 years, and the quality guarantee period of light source produced by normal manufacturers is 3 years. The use of a malformed solar street light source to ensure the dispersion of enthusiasm may effectively prolong the life of the solar street light sources.
3. The firmness of the work of the guarantee system. The wiring on the back of the solar panel is a reverse buckle design, which can be gently pried open with a screwdriver. The wiring of the solar panel (red cap is connected to the positive pole line, black cap is connected to the negative pole line) corresponding to the positive and negative pole line separated from the black cap of the lithium integrated battery, and the wiring should be wrapped with electrical tape.
Solar street lamp LED lamp head wire lithium control battery white cap separated, wiring attention to use electrical tape wrap. Solar street lamps in the use of deformity is not present in the process of combustion situation suddenly, if have this picture, it is possible that internal wiring present problems caused by inadequate or battery power supply, thus to eliminate internal problems, ensure implement strong lighting in rainy weather, illumination when solar panels can not have obstructions affected it's receiving light energy.
Four, solar street light is the use of sunlight as energy, converted into electrical energy stored in the battery, the night through the battery power supply light, so in the process of the device, we must choose around the place without shelter device solar cell components. The battery assembly should be cleaned regularly to ensure that the battery may be malformed. Secondly, in the process of the device, we must adopt the accessories produced by the regular manufacturer, otherwise, a series of problems will occur in the process of using the device in a short time.
When using the device may be careful how many points above, it is possible to display the maximum role of the solar street light. Provide more convenient living conditions for people in new cities. Solar street lamp manufacturers are consulted about photovoltaic problems.
