1. Fully understand the characteristics of solar street lamps, light sources and light poles, and rationally select solar lamps, light sources and light poles according to the actual road and reference lighting standards, combined with the investment budget, so as to give full play to the advantages of high efficiency and energy saving of light sources, light distribution and accessory combination of solar lamps.
2. Under the condition of guaranteed lighting performance, appropriately increase the spacing of solar street lamps to save the number of lamps; Appropriately raise the height of the solar street lamp pole to improve the illumination effect; As far as possible, divide the road with poles to save construction costs.
3. In combination with road engineering, timely and advance intervention in pole position selection, foundation construction and embedment, so as to timely find problems, make reasonable changes, ensure quality and save investment.
4, according to the actual and geological situation of the solar street lamp project site, design and manufacture the solar street lamp pole foundation and high pole lamp foundation, to ensure that the foundation is solid and reliable. Special attention should be paid to the embedment bolt and the reserved hole of the rod seat, accurate positioning, reasonable embedment length and external length, thread part should be properly protected to facilitate hoisting positioning.
5, in the rock, wind fossil lot, scattered grounding and segmented grounding is difficult to meet the requirements, you can consider the design requirements of galvanized flat steel conductors such as long connection, connection should be reliable, at the same time to be appropriate protection treatment, and reliable connection with the embedded foundation, to ensure that each lamp pole and the reliable connection. Solar street lamp in the tall lamp is scattered, mainly rely on the foundation grounding, when necessary to use resistance reducer, reduce the grounding resistance.
6, lifting operation should strictly comply with the operation rules. Special attention should be paid to the power grid lines and other lines around the lifting equipment, as well as surrounding structures. The lifting point should be reasonable during lifting and timely adjustment should be made after positioning.
7. Pay attention to the beauty of the solar street lamp post after installation. From the beginning of foundation construction, the lamp position shall control the straightness according to the main line, and rationally change the line shape according to the road design. The lamp post shall be straight, and the welding seam and the access port shall avoid the main line direction, and keep the whole line consistent. The Angle of the cantilever of the lamp pole should be kept in harmony with the direction and Angle.
8, solar street lamps and lanterns internal accessories plug parts to plug tightly, plug firmly, to avoid loose wind and poor contact caused by failure. Solar street lamp and lamp pole, lamp pole and cantilever are fixed reliably. Each pole of solar street lamp should be set in place, lifting frame and lamp should be fixed reliably, lifting system should be safe and reliable, lifting, limit, positioning and other functions should be complete.
